Rockfall netting
The high tensile rockfall netting system is installed in the same general way as conventional double twist mesh.
PRODUCT DESCRIPTION
The high tensile rockfall netting system is installed in the same general way as conventional double twist mesh. It is easy to handle and will not require extensive modification of existing method statements and installation techniques. The inclusion of the steel ropes greatly enhances the transfer of loads from the mesh into the anchorage system thereby increasing safety, capacity and durability of the mesh as a complete system.
SPECIFICATION
Properties | ||||
No | Properties | Standard/Code | Unit | Specification |
MESH WIRE PROPERTIES | ||||
1 | Mesh Opening | EN 10223-3 | mm | 80 |
2 | Mesh Type | EN 10223-3 | cm x cm | 8x10 |
3 | Roll Width | Standard width | m | 2.7 |
4 | Roll Length | Specific Requirement | m | 25 |
5 | Spacing of longitudinal Wire Rope | - | cm | 32 (±2) |
MESH WIRE PROPERTIES | ||||
1 | Wire Diameter | EN 10223-3 | mm | 2.7 (±0.05) |
2 | Tensile Strength of Wire | EN 10223-3 | N/mm2 | 350-550 |
3 | Elongation | EN 10223-3 | % | ≥10 |
4 | Zn 90%-Al 10% Coating | EN 10244 -2, class A | G/m2 | ≥245 |
5 | Zinc Coating Adhesion | EN 10244 | - | No flaking of the zinc coating |
WIRE ROPE 8MM | ||||
1 | Construction of Wire Rope | EN 12358-4 | - | 6x7 -WSC |
2 | Diameter of Wire Rope | EN 12358-4 | mm | 8.0 |
3 | Rope Grade | EN 12358-4 | - | 1770N/mm2 |
4 | Breaking Load of Wire Rope | EN 12358-4 | kn | ≥41 |
5 | Mass of Zn 95%-Al 5% Coating | EN 10264-2, class A | - | ≥150 |
Navigation
E-mail: export@wiremesh-product.com
Tel.: +86 311 6803 6355
Add.: Taicheng Industrial Area, Anping County, Hengshui, Hebei, China.
Leave a Message